Network Appliance NS0-191 Questions Answers

You receive the AutoSupport message, “CONTROLLER TAKEOVER COMPLETE PANIC” from a FAS3250 controller. You suspect a hardware issue. A core file was written to disk.
In this scenario, which two actions would you perform to obtain more information? (Choose two.)

A. You turn on “hardware debugging mode” using System Manager.
B. You collect the core file and upload it to NetApp Global Services (NGS) for analysis.
C. You boor the failed controller, carry out a giveback, and wait until the issue reoccurs.
D. You boot the failed controller to maintenance mode and execute the sldiag command.

Answer: AB

Network Security Appliance Market Leading Key Players – Cisco Systems, Fortinet, Juniper Networks, Palo Alto Networks, Symantec Corporation, Intel Corporation, Honeywell International and Trend Micro

Network security devices are defined as a set of security tools and network administration that the main organizations install on the site to prevent unauthorized access to networks and ensure data security. The different types of network security devices available in the market are firewalls, intruder detection and prevention, content management, unified threat management and virtual private network.

Increase in cyber attacks and cybercrimes, growing vulnerabilities in SS7 are the main drivers that help increase the growth of the network security devices market, while its complex structure and the lack of preventive firewall maintenance can act as a restriction factor for the market of network security devices. Promoting cybercrime, the implementation of the device "bring your own device" and the adoption of technological advances will add new opportunities for this market in the coming years.

The "Market analysis of global network security devices up to 2025" is a specialized and in-depth study of the network security device industry with a focus on the global market trend. The purpose of the report is to provide an overview of the market of global network security devices with detailed market segmentation by type, deployment mode, vertical and geographical. It is expected that the global market for network security devices will experience high growth during the forecast period. The report provides key statistics on the state of the market of the main market players and offers key trends and opportunities in the market.

The report provides a detailed description of the industry, which includes both qualitative and quantitative information. It provides a general overview and forecast of the market of global network security devices according to type, deployment mode and vertical. It also provides market size and forecast up to 2025 for the general market of network security devices with respect to five main regions, namely; North America, Europe, Asia-Pacific (APAC), Middle East and Africa (MEA) and South America (SAM). The market of each region is subsequently subdivided by respective countries and segments. The report covers the analysis and forecast of 16 counties around the world, along with the current trend and the opportunities that prevail in the region.

In addition to this, the report analyzes the factors that affect the market both from the point of view of supply and demand and evaluates the market dynamics that affect the market during the forecast period, ie drivers, restrictions , opportunities and the future trend. The report also provides a comprehensive PEST analysis for the five regions; North America, Europe, APAC, MEA and South America after evaluating the political, economic, social and technological factors that affect the market in these regions.

In addition, the key players in the market for network security devices that influence the market are outlined in the study along with their SWOT analysis and market strategies. The report also focuses on the main players in the industry with information such as profiles of companies, products and services offered, financial information of the last 3 years, key development in the last five years. Some of the main players that influence the market are Check Point Software Technologies, Cisco Systems, Fortinet, Juniper Networks, Palo Alto Networks, Symantec Corporation, Intel Corporation, Honeywell International, Trend Micro, Bosch Sicherheitssysteme GmbH and others.

Network Appliance NS0-191 Question Answer

You are creating a disk-partitioned root aggregate.
Which two rules are enforced automatically when accomplishing this task? (Choose two.)

A. A RAID group cannot have more than one partition from the same disk.
B. A RAID group can have more than one partition from the same disk.
C. The only supported RAID type for aggregates containing root-data partitioned disks is RAID-DP.
D. The only supported RAID type for aggregates containing root-data partitioned disks is RAID 4

Answer: AC

Your customer's MetroCluster controllers have generated AutoSupport notifications with a “DISK REDUNDANCY FAILED” message. Referring to the exhibit, which component is causing the problem?

A. the SAN switch site3_3
B. the SAN switch site1_2
C. the ATTO bridges on site3
D. the inter-switch link (ISL) between site1 and site3

Answer: D

Network Appliance NS0-191 Question Answer

An administrator notices that the clustered Data ONTAP 8.2.3 controllers are less responsive than normal. You use OnCommand Performance Manager but do not see obvious problems, yet, this particular issue is constant. Users are starting to complain.
Which tool would you use to collect data to help diagnose this issue?

A. Perfstat
B. Perfmon
C. AutoSupport
D. Performance Archive

Answer: B



Click the Exhibit tab.

The exhibit shows an overview of a customer's network design. The customer is experiencing ping loss. As part of the troubleshooting process, you receive output by using the ifgrp status command from the node shell. In this scenario, what is the customer's problem?

A. The interface group on the controller is not using the default type, causing a connection mismatch with the switch.
B. Link aggregation is not active on the switch, despite being in the design.
C. Virtual interface (VIF) is deprecated in clustered Data ONTAP because the interface group is not working as it should.
D. Virtual LANs (VLANs) are not used, which causes the interfaces to be overloaded.

Answer: C

Network Appliance NS0-191 Question Answer

In this scenario, which action will solve the error condition

A. Add a rule ti the default export policy ti Include the -client match 192.168.10.0/24 parameter.
B. Stop aod start NewSVM.
C. Associate a current expert policy ti the right volume (/) if NewSVM.
D. Configure the default route fir NewSVM correctly.

Answer: A

Crestron’s DM XiO Director Acts as ‘Virtual Switcher’ for DM NVX Series Networks

The Crestron DM XiO Director facilitates the provisioning and management of Crestron DM NVX network AV systems.

Crestron will debut the business-grade network application DM XiO Director at InfoComm 2017 this week in Orlando. Crestron says the DM XiO Director is a "virtual switch" that offers configuration, control and management of large-scale DM Series AV networks in enterprise environments.The company adds that its DM NVX Series is the industry's only secure solution offering 4K60, 4: 4: 4 and HDR over standard 1Gb Ethernet.

"The DM XiO Director gives life to the NVX DM series, delivering the promise of unlimited AV network scalability and flexibility," said Steve Samson, executive director of business development for Crestron. "It makes it incredibly simple to manage large arrays of NVX DM terminals over a standard IP network."Virtual DM Switcher

The DM XiO Director practically emulates the functionality of a traditional hardware based DigitalMedia matrix switcher, routing 4K60 streaming AV signals through a room, building or campus. Three models are available that support end-devices (DM-XIO-DIR-80), 160 (DM-XIO-DIR-160) or unlimited (DM-XIO-DIR-ENT). DM XiO Director can handle even the largest corporate, university, government, military, medical, transportation, sports, entertainment, hospitality, gaming or sales application company.Flexible Configuration

DM XiO Director automatically discovers each DM NVX endpoint on the network and allows each of them to be assigned to a "domain" using a simple user interface. A domain is simply a logical grouping of endpoints that work together as a single switching entity, allowing individual rooms and other subsystems to be arranged and independently controlled. The DM XiO Director effectively eliminates the need for physical switches in each room, replacing them with the virtual equivalent running on the AV network.Easy configuration, control

The DM XiO Director offers an intuitive web-based user interface for easy system configuration, signal routing and full diagnostics of the entire AV network. Each domain and endpoint can be designated with an easy-to-use name. Browse the entire system is easy to use search box to quickly find domains, endpoints, entries and exits by name or address. A system summary screen is also provided which shows the status of the video and audio signal for each input and output in a graphic design that is easy to see and navigate.

Network Appliance NS0-191 Question Answer

Which two capabilities does the Flash Cache feature have that the Flash Pool feature does not
have? (Choose two.)

A. Flash Cache works for all aggregates assigned to a node.
B. Flash Cache is a read-only cache.
C. Cached data is available and unaffected by takeover events.
D. Compressed blocks are cached.

Answer: AB

A customer cannot create a new volume from OnCommand System Manager.
Which two clustered Data ONTAP daemons would be at fault in this scenario? (Choose two.)

A. seed
B. bcomd
C. mqwd
D. vldb

Answer: BD